Archives

HCB01

Fixture constructed of an extruded aluminum housing, extruded, frosted acrylic lens and machined aluminum end caps.

Model variations offered for surface, wall mount and cable suspended applications.

Optic options include an acrylic frosted flush, acrylic Fresnel wall wash lens (for surface or cable mount fixtures) and flat blade louver.

Standard finishes include architectural white (semi-matte), white (semi-gloss), black (semi-matte), matte black, environmental satin silver (alternative to anodize), bronze and primer powder coat, applied post production (consult factory for custom finishes).

Satin anodize finish also available (may require additional lead time).

Available in nominal lengths of 2’–8’ single fixtures and continuous runs.

Basic continuous run fixtures provided with 18 ga. wiring harness for 6 Amp maximum load (consult factory for runs requiring multiple circuits, sensor integration, etc.).

Standard integral 120-277V driver offered with 0-10V dimming or non-dim (consult factory regarding other dimming protocols).

Integral 120-277V emergency battery backup available for 4’ or 8’ nominal non-dim or 0-10V (consult factory for all other lengths/drivers).

Standard light outputs are 640 and 850 lumens per foot for the Lambertian optic option.

BIOS LEDs have 80+ CRI, R9 90+ and are available in static 3000K, 3500K, 4000K and two dynamic options in 2700-3000K, 2700-3500K and 2700-4000K.

Bartco Lighting Controls Capable fixture available with integrated controls from a variety of suppliers.

Life: 50,000 hours L70.

Limited five year warranty.

UL and C-UL listed for dry and damp locations.

IBEW manufactured and assembled.

Made in U.S.A.

GRM30

Fixture constructed of an extruded aluminum housing, extruded acrylic lenses and machined aluminum end caps.

Fixture provided with minimal, small diameter aircraft cable and hardware.

Optic options include an acrylic frosted flush or 1/2” drop lens and flat blade louver.

Standard finishes include architectural white (semi-matte), white (semi-gloss), black (semi-matte), matte black, environmental satin silver (alternative to anodize), bronze and primer powder coat, applied post production (consult factory for custom finishes).

Satin anodize finish also available (may require additional lead time).

Optional end cap with chamfered edges and lathe machined face available in mill aluminum finish.

Available in nominal lengths of 2’–8’ single fixtures and continuous runs.

Standard integral 120-277V driver offered with 0-10V dimming or non-dim (other dimming driver options available).

Remote mounted emergency battery backup available (ordered separately, consult factory for details).

Standard light outputs range from 470 to 640 lumens per foot, depending on optic option.

LEDs available in 2700K, 3000K, 3500K and 4000K, within a 3 step MacAdam ellipse, all with 90+ CRI typical.

Bartco Lighting Controls Capable fixture available with integrated controls from a variety of suppliers.

Life: 50,000 hours L70.

Limited five year warranty.

UL and UL-C listed for dry and damp locations.

IBEW manufactured and assembled.

Made in U.S.A.

GRM20

Fixture constructed of an extruded aluminum housing, extruded acrylic lenses and machined aluminum end caps.

Model variations offered for surface and cable suspended applications.

Optic options include an acrylic frosted flush or 1/2” drop lens and flat blade louver.

Standard finishes include architectural white (semi-matte), white (semi-gloss), black (semi-matte), matte black, environmental satin silver (alternative to anodize), bronze and primer powder coat, applied post production (consult factory for custom finishes).

Satin anodize finish also available (may require additional lead time).

Optional end cap with chamfered edges and lathe machined face available in mill aluminum finish.

Available in nominal lengths of 2’–8’ single fixtures and continuous runs.

Standard integral 120-277V driver offered with 0-10V dimming or non-dim.

Remote mounted emergency battery backup available (ordered separately, consult factory for details).

Standard light outputs range from 470 to 630 lumens per foot, depending on optic option.

LEDs available in 2700K, 3000K, 3500K and 4000K, within a 3 step MacAdam ellipse, all with 90+ CRI typical.

Bartco Lighting Controls Capable fixture available with integrated controls from a variety of suppliers.

Life: 50,000 hours L70.

Limited five year warranty.

UL and C-UL listed for dry and damp locations.

IBEW manufactured and assembled.

Made in U.S.A.

GRM10

Fixture constructed of an extruded aluminum housing, extruded acrylic lens and machined aluminum end caps

Model variations offered for surface and cable suspended applications

Standard finishes include architectural white (semi-matte), white (semi-gloss), black (semi-matte), matte black, environmental satin silver (alternative to anodize), bronze and primer powder coat, applied post production (consult factory for custom finishes)

Satin anodize finish also available (may require additional lead time)

Optional end cap with chamfered edges and lathe machined face available in mill aluminum finish

Surface mount models install with spring clips, are wired with 10’ low voltage leads and available with back or end feed options

Included standard remote 120-277V driver offered with 0-10V dimming or non-dim (other dimming driver options available)

Remote mounted emergency battery backup available (ordered separately, consult factory for details)

Standard outputs are 350 and 600 lumens per foot

LEDs available in 2700K, 3000K, 3500K and 4000K, within a 3 step MacAdam ellipse, all with 90+ CRI typical

Life: 50,000 hours L70

Limited five year warranty

UL and C-UL listed for dry and damp locations

IBEW manufactured and assembled

Made in U.S.A.

BFZ100-T

Fixture constructed of an extruded aluminum housing, flat, frosted acrylic lens and heavy gauge, steel mounting brackets

Fixtures project into interior space from wall or ceiling surfaces

Up to three fixtures of any length can be joined in a run

Fixture ends mount to accessory flush-mount wall plates, Fractalz Recessed or Fractalz Suspended fixtures

Flush-mount wall plates mate to 4” square or octagonal junction boxes (supplied by others)

Available in nominal 21”–51” lengths

Fixtures wired with 10’ low voltage leads

Included standard remote 120-277V driver offered with 0-10V dimming or non-dim

Standard outputs are 665 or 1000 lumens per foot

LEDs available in 2700K, 3000K, 3500K, and 4000K, within a 3 step MacAdam ellipse, all with 90+ CRI typical

Life: 50,000 hours L70

Limited five year warranty

UL and C-UL listed for dry and damp locations

IBEW manufactured and assembled

Made in U.S.A.

BFZ100-S

Fixture constructed of an extruded aluminum housing, flat acrylic lens and machined aluminum end caps

Available for direct, indirect or direct/indirect configurations with Lambertian or batwing indirect optic options

Fixture ends can mount to Fractalz Through-space or Fractalz Recessed fixtures or accessory flush mount wall plates

Available in nominal lengths of 2’–8’ single fixtures and continuous runs

Depending on light source orientation, included standard driver is 120-277V remote or integral and offered with 0-10V dimming or non-dim

Standard light outputs range from 665–1000 lumens per foot for the direct source and 700–1415 lumens per foot for the indirect source

LEDs available in 2700K, 3000K, 3500K, and 4000K, within a 3 step MacAdam ellipse, all with 90+ CRI typical

Life: 50,000 hours L70

Limited five year warranty

UL and C-UL listed for dry and damp locations

IBEW manufactured and assembled

Made in U.S.A.

BFZ100-R

Fixture constructed of an extruded aluminum housing, sheet formed plaster flanges and frosted acrylic lens

Fixture flush mounts in walls or hard ceilings and integrates with the Fractalz series Through-Space luminaires

Available in nominal lengths of 24”-96” at 6” intervals

Removable end plaster flanges convert single fixtures for use in continuous runs

Fixtures provided with 18 ga. wiring harness for 6 Amp maximum load

Standard integral 120-277V constant voltage driver offered with 0-10V dimming or non-dim

Standard outputs are 665 or 1000 lumens per foot

LEDs available in 2700K, 3000K, 3500K, and 4000K, within a 3 step MacAdam ellipse, all with 90+ CRI typical

Life: 50,000 hours L70

Limited five year warranty

UL and C-UL listed for dry and damp locations

IBEW manufactured and assembled

Made in U.S.A.

REAL80

Fixture constructed of an extruded aluminum housing, extruded, frosted acrylic lens, machined aluminum end caps and wood or steel side cladding

Model variations offered for cable suspended and wall mount applications

Wood side cladding is 1/2” thick, furniture grade, solid wood in walnut, European beech, mahogany, white oak and bamboo ply or nine-ply Baltic birch with maple face

Solid wood planks and bamboo ply are hand finished in five to seven coats of clear shellac and sealed with clear liquid wax for a natural look and easy cleaning

Baltic birch planks are available with a clear shellac finish or water-based stain with clear sealer

Corten steel side cladding is 14 gauge with matte clear powder coat finish and includes button head fasteners in black finish

Optional decorative industrial hardware with black finish available for wood cladding

Fixtures available in nominal lengths of 2’–8’

Standard integral 120-277V driver offered with 0-10V dimming or non-dim (other dimming driver options available)

Integral 120-277V emergency battery backup available for 6’ or 8’ nominal, single circuit fixtures with non-dim or 0-10V dimming (consult factory for all other lengths/drivers)

Standard light outputs are 315 and 405 lumens per foot

LEDs available in 2700K, 3000K, 3500K and 4000K, within a 3 step MacAdam ellipse, all with 90+ CRI typical

Parabolic louver option available

Life: 50,000 hours L70

Limited five year warranty

UL and C-UL listed for dry locations

IBEW manufactured and assembled

Made in U.S.A.

BHR301

Fixture housing, chassis and trim elements made of extruded aluminum, with additional heavy gauge sheet parts

Model options available for typical 9/16” and 15/16” grid ceilings or hard ceilings with flange and trimless mounting

Coffer formed of 98% reflective material

Available in nominal lengths of 2’–7’ single fixtures and continuous runs

Basic continuous run fixtures provided with 18 ga. wiring harness for 6 Amp maximum load (consult factory for runs requiring multiple circuits, sensor integration, etc.)

LED modules, driver, and reflector are integrated into the chassis, which snaps into the outer housing for simple and quick installation

Standard integral 120-277V driver offered with 0-10V dimming or non-dim (other dimming driver options available)

Integral 120-277V emergency battery backup available for 4’ nominal non-dim or 0-10V (consult factory for all other lengths/drivers)

Standard light outputs are 665, 880 and 1090 lumens per foot

LEDs available in 2700K, 3000K, 3500K, and 4000K, within a 3 step MacAdam ellipse, all with 90+ CRI typical

Life: 50,000 hours L70

Chicago plenum rated option available

Nominal weight is 2.8 lbs. per foot

Limited five year warranty

UL and C-UL listed for dry and damp locations

IBEW manufactured and assembled

Made in U.S.A.

BSS214

Fixture constructed of an extruded aluminum housing, extruded, frosted acrylic lens and machined aluminum end caps.

Model variations offered for surface, wall mount and cable suspended applications.

Standard finishes include architectural white (semi-matte), white (semi-gloss), black (semi-matte), matte black, environmental satin silver (alternative to anodize), bronze and primer powder coat, applied post production (consult factory for custom finishes).

Satin anodize finish also available (may require additional lead time).

Available in nominal lengths of 2’–8’ single fixtures and continuous runs.

Basic continuous run fixtures provided with 18 ga. wiring harness for 6 Amp maximum load (consult factory for runs requiring multiple circuits, sensor integration, etc.).

Standard integral 120-277V driver offered with 0-10V dimming or non-dim (other dimming driver options available).

Integral 120-277V emergency battery backup available for 4’ or 8’ nominal non-dim or 0-10V (consult factory for all other lengths/drivers).

Standard outputs are 555, 720 and 950 lumens per foot.

LEDs available in 2700K, 3000K, 3500K and 4000K, within a 3 step MacAdam ellipse, all with 90+ CRI typical.

Life: 50,000 hours L70.

Bartco Lighting Controls Capable fixture available with integrated controls from a variety of suppliers.

Limited five year warranty.

UL and C-UL listed for dry and damp locations.

IBEW manufactured and assembled.

Made in U.S.A.

BHR300

Fixture constructed of an extruded aluminum housing, chassis, and machined aluminum end caps

Model variations offered for surface and cable suspended applications

Coffer formed of 98% reflective material

Standard finishes include architectural white (semi-matte), white (semi-gloss), black (semi-matte), matte black, environmental satin silver (alternative to anodize), bronze and primer powder coat, applied post production (consult factory for custom finishes)

Satin anodize finish also available (may require additional lead time)

Available in nominal lengths of 2’–7’ single fixtures and continuous runs

Basic continuous run fixtures provided with 18 ga. wiring harness for 6 Amp maximum load (consult factory for runs requiring multiple circuits, sensor integration, etc.)

LED modules, driver, and reflector are integrated into the chassis, which snaps into the outer housing for simple and quick installation

Standard integral 120-277V driver offered with 0-10V dimming or non-dim (other dimming driver options available)

Integral 120-277V emergency battery backup available for 4’ nominal non-dim or 0-10V (consult factory for all other lengths/ drivers)

Standard light outputs are 665, 880 and 1090 lumens per foot

LEDs available in 2700K, 3000K, 3500K, and 4000K, within a 3 step MacAdam ellipse, all with 90+ CRI typical

Life: 50,000 hours L70

Limited five year warranty

UL and C-UL listed for dry and damp locations

IBEW manufactured and assembled

Made in U.S.A.

SK21-BI

  • LED lamp conforms to standard T5 fluorescent lengths for use in a multitude of Bartco Lighting fixtures
  • Fixture constructed of an extruded aluminum housing in satin anodize finish, white or clear polycarbonate lens and G5 bi-pin ends
  • Available in nominal T5 lamp lengths of 1’-4’
  • Integral 120V driver features 0-10V dimming down to 5%
  • Standard light output is 250 or 325 lumens per foot operating at 3.5W per foot
  • LEDs available in 2700K, 3000K, 3500K and 4000K, within a 3 step MacAdam ellipse, all with 95 CRI typical
  • LED life rated at 40,000 hours at 40°C ambient
  • Five year limited warranty
  • UL and C-UL certified for dry and damp locations
  • Assembled in U.S.A.

BSW755

Fixture constructed of an extruded aluminum housing, frosted, extruded acrylic lens and sheet aluminum end caps.

Standard finishes include architectural white (semi-matte), white (semi-gloss), black (semi-matte), matte black, environmental satin silver (alternative to anodize), bronze and primer powder coat, applied post production (consult factory for custom finishes).

Available in nominal lengths of 2’–8’ single fixtures and continuous runs.

Housing provided with a Ø7/8″ hole for back feeding.

Standard integral 120-277V wet location driver offered with 0-10V dimming or non-dim.

Standard output is 750 lumens per foot.

LEDs available in 2700K, 3000K, 3500K, and 4000K, within a 3 step MacAdam ellipse, all with 90+ CRI typical.

Life: 50,000 hours L70.

Limited five year warranty.

UL and C-UL listed for wet locations.

IBEW manufactured and assembled.

Made in U.S.A.

BSW750

Fixture constructed of an extruded aluminum housing, frosted, extruded acrylic lens and sheet aluminum end caps.

Standard finishes include architectural white (semi-matte), white (semi-gloss), black (semi-matte), matte black, environmental satin silver (alternative to anodize), bronze and primer powder coat, applied post production (consult factory for custom finishes).

Available in nominal lengths of 2’–8’ single fixtures and continuous runs.

Fixtures wired with 10’ low voltage leads and Ø7/8″ hole for back feeding.

Included remote 120-277V wet location driver offered with 0-10V dimming or non-dim and surface mount aluminum enclosure.

Standard output is 580 lumens per foot.

LEDs available in 2700K, 3000K, 3500K and 4000K, within a 3 step MacAdam ellipse, all with 90+ CRI typical.

Life: 50,000 hours L70.

Limited five year warranty.

UL and C-UL listed for wet locations.

IBEW manufactured and assembled.

Made in U.S.A.

BSW501

Fixture housing constructed of an extruded aluminum tube, frosted acrylic extruded lens and sheet aluminum end caps.

Fixture arms are constructed of zinc plated steel pipe Ø5/8” extruded aluminum sleeves and machined aluminum end cap couplers.

Includes Ø4-3/4” aluminum plate for mounting to 4” octagonal wall boxes (by others).

Standard finishes include architectural white (semi-matte), white (semi-gloss), black (semi-matte), matte black, environmental  satin silver (alternative to anodize), bronze and primer powder coat, applied post production (consult factory for custom finishes).

Single and continuous run fixtures available with arm center distances of 2’-5’ nominal.

Arms allow fixture to project from a wall or roofline nominally 3”, 6” or 12”.

Fixture housing rotates 332° and is locked in place with hex fastener.

Extruded acrylic lens options available for Lambertian or asymmetric light distributions.

Fixture wired with 10’ low voltage leads (measured from the end cap).

Included remote 120-277V wet location driver offered with 0-10V dimming or non-dim and surface mount aluminum enclosure.

Standard outputs are 505 lumens per foot for the Lambertian and 595 lumens per foot for the asymmetric optic option.

LEDs available in 2700K, 3000K, 3500K and 4000K, within a 3 step MacAdam ellipse, all with 90+ CRI typical.

Life: 50,000 hours L70.

Limited five year warranty.

UL and C-UL listed for wet locations.

IBEW manufactured and assembled.

Made in U.S.A.

BSW225

Fixture constructed of an extruded aluminum housing, extruded, frosted acrylic lens and machined aluminum end caps.

Standard finishes include architectural white (semi-matte), white (semi-gloss), black (semi-matte), matte black, environmental satin silver (alternative to anodize), bronze and primer powder coat, applied post production (consult factory for custom finishes).

Available for surface or wall mounting in nominal lengths of 2’–8’ single fixtures and continuous runs.

Fixtures wired with 10’ low voltage leads and provided with a Ø7/8″ hole for back feeding.

Included remote 120-277V wet location driver offered with 0-10V dimming or non-dim and surface mount aluminum enclosure.

Standard output is 515 lumens per foot.

LEDs available in 2700K, 3000K, 3500K and 4000K, within a 3 step MacAdam ellipse, all with 90+ CRI typical.

Life: 50,000 hours L70.

Limited five year warranty.

UL and C-UL listed for wet locations.

IBEW manufactured and assembled.

Made in U.S.A.

BSW215

Fixture constructed of an extruded aluminum housing, extruded, frosted acrylic lens and machined aluminum end caps.

Standard finishes include architectural white (semi-matte), white (semi-gloss), black (semi-matte), matte black, environmental satin silver (alternative to anodize), bronze and primer powder coat, applied post production (consult factory for custom finishes).

Available for surface or wall mounting in nominal lengths of 2’–8’ single fixtures and continuous runs.

Housing provided with a Ø7/8″ hole for back feeding.

Standard integral 120-277V wet location driver offered with 0-10V dimming or non-dim.

Standard output is 710 lumens per foot.

LEDs available in 2700K, 3000K, 3500K and 4000K, within a 3 step MacAdam ellipse, all with 90+ CRI typical.

Life: 50,000 hours L70.

Limited five year warranty.

UL and C-UL listed for wet locations.

IBEW manufactured and assembled.

Made in U.S.A.

BSW214

Fixture constructed of an extruded aluminum housing, extruded, frosted acrylic lens and machined aluminum end caps.

Standard finishes include architectural white (semi-matte), white (semi-gloss), black (semi-matte), matte black, environmental satin silver (alternative to anodize), bronze and primer powder coat, applied post production (consult factory for custom finishes).

Available for surface or wall mounting in nominal lengths of 2’–8’ single fixtures and continuous runs.

Housing provided with a Ø7/8″ hole for back feeding.

Standard integral 120-277V wet location driver offered with 0-10V dimming or non-dim.

Standard output is 650 lumens per foot.

LEDs available in 2700K, 3000K, 3500K and 4000K, within a 3 step MacAdam ellipse, all with 90+ CRI typical.

Life: 50,000 hours L70.

Limited five year warranty.

UL and C-UL listed for wet locations.

IBEW manufactured and assembled.

Made in U.S.A.

BSW210

Fixture constructed of an extruded aluminum housing, extruded, frosted acrylic lens and machined aluminum end caps.

Model variations offered for surface or wall mount applications with rectangular or rounded profiles.

Standard finishes include architectural white (semi-matte), white (semi-gloss), black (semi-matte), matte black, environmental satin silver (alternative to anodize), bronze and primer powder coat, applied post production (consult factory for custom finishes).

Available in nominal lengths of 2’–8’ single fixtures and continuous runs.

Housing provided with a Ø7/8″ hole for back feeding.

Standard integral 120-277V wet location driver offered with 0-10V dimming or non-dim.

Standard output is 720 lumens per foot.

LEDs available in 2700K, 3000K, 3500K, and 4000K, within a 3 step MacAdam ellipse, all with 90+ CRI typical.

Life: 50,000 hours L70.

Limited five year warranty.

UL and C-UL listed for wet locations.

IBEW manufactured and assembled.

Made in U.S.A.

BSW208

Fixture constructed of an extruded aluminum housing, extruded, frosted acrylic lens and machined aluminum end caps.

Standard finishes include architectural white (semi-matte), white (semi-gloss), black (semi-matte), matte black, environmental satin silver (alternative to anodize), bronze and primer powder coat, applied post production (consult factory for custom finishes).

Available for surface or wall mounting in nominal lengths of 2’–8’ single fixtures and continuous runs.

Fixtures wired with 10’ low voltage leads and Ø7/8” hole for back feeding.

Included remote 120-277V wet location driver offered with 0-10V dimming or non-dim and surface mount aluminum enclosure.

Standard output is 525 lumens per foot.

LEDs available in 2700K, 3000K, 3500K and 4000K, within a 3 step MacAdam ellipse, all with 90+ CRI typical.

Life: 50,000 hours L70.

Limited five year warranty.

UL and C-UL listed for wet locations.

IBEW manufactured and assembled.

Made in U.S.A.