Inwall BIW110

Flush mount linear LED luminaire for 5/8” drywall

CutsheetExplore InWall

Downloads

BIW110
Inspiration

Features

The In-Wall miniature profile LED luminaire flush mounts into finished 5/8” thick drywall without disturbing wall or ceiling framing, to create 2” wide bands of continuous light. Single fixtures up to 8’ nominal or continuous runs attach directly to installed drywall and framing and are finished out with joint compound and paint. The field installed integral driver housing fits between 16” on-center studs.

Performance

  • Nominal Length: 48"
  • Lumens/ft: 500
  • Watts/ft: 6.4
  • Luminaire Lumens: 1978
  • Efficacy (LPW): 69

Note: All data reflects fixtures with 3500K LEDs

Specifications

Fixture constructed of extruded aluminum frame sides, 20 gauge steel and aluminum end plates, joining components and reflectors and 2” wide frosted acrylic lens

Available in nominal 24”–96” lengths in 3” increments as single fixtures and continuous runs

Single fixtures and runs can be flush mounted on all sides within a single plane or butt up to an adjacent plane

LED module/reflector assembly accessed and serviced through the fixture aperture

Standard constant voltage driver offered with 0-10V dimming or non-dim and with integral or remote mount options

Integral driver option ensures there are no issues with voltage drop across the length of the fixture run

Driver housing designed to fit within 16” on center wall studs and can be positioned in the field

Frosted acrylic lens segments are provided longer than required and trimmed to fit in the field (lens quantities lengths and joints for a given run will be optimized in the shop drawing phase)

Standard output is 500 lumens per foot

LEDs available in 2700K, 3000K, 3500K, and 4000K, within a 3 step MacAdam ellipse, all with 80+ CRI typical

Life: 50,000 hours L70

Limited five year warranty

UL and C-UL listed for dry and damp locations and I.C. rated

IBEW manufactured and assembled

Made in U.S.A.

Product Data

Nominal Fixture Length

  • 24-1/8” to 96-1/8” nominal in 3” increments

Actual dimension dependent on run configuration and option

Correlated Color Temperature

  • 27: 2700K-80+ CRI
  • 30: 3000K-80+ CRI
  • 35: 3500K-80+ CRI
  • 40: 4000K-80+ CRI

Driver

  • I: integral non-dimming
  • IDM: integral dimming, 0-10V, 10%
  • R: remote non-dimming
  • RDM: remote dimming, 0-10V, 10%

Light Output

(lumens per foot)

  • R: regular – 500

Run Configuration

  • SN: single
  • ST: starter
  • AD: adder
  • TR: terminator

Consult Configuration Options chart to verify availability of run configuration/option

Section

Ready To Illuminate
Your Next Project?

Find your nearest Bartco rep now