Mullion BSS710

1” tall indirect LED luminaire, remote driver

CutsheetExplore Mullion

Downloads

Features

The BSS710 is a low profile, remote driven, linear LED luminaire suitable for indirect lighting applications on window mullions or over doorways. The 1” tall by 2-3/8” wide extruded aluminum housing is fitted with 90 CRI LEDs capped with a flat, frosted lens. ¼” thick machined aluminum end caps finish off the fixture ends.

Finishes

Architectural White (semi-matte)
AW
Architectural White (semi-matte)
White (semi-gloss)
WH
White (semi-gloss)
Black (semi-matte)
BL
Black (semi-matte)
Matte Black
MB
Matte Black
Environmental Satin Silver
ESS
Environmental Satin Silver
Bronze
BZ
Bronze
Primer
PR
Primer
Satin Anodize
SA
Satin Anodize
Inquire about custom finishes

Performance

  • Nominal Length: 4'
  • Output: L: low | R: regular
  • Lumens/ft.: L: 550 | R: 750
  • Watts/ft.: L: 5 | R: 8
  • Luminaire Lumens: L: 2044 | R: 2835
  • Efficacy (LPW): L: 109 | R: 95

Note: All data reflects fixtures with 3500K LEDs

Specifications

Fixture constructed of an extruded aluminum housing, extruded, frosted acrylic lens and machined aluminum end caps

Standard finishes include architectural white (semi-matte), white (semi-gloss), black (semi-matte), matte black, environmental satin silver (alternative to anodize), bronze and primer powder coat, applied post production (consult factory for custom finishes)

Satin anodize finish also available (may require additional lead time)

Fixture housing engages with an extruded aluminum cleat in an indirect orientation and is secured with lock screws

Available in nominal lengths of 2’–8’ as single fixtures and continuous runs

Fixtures wired with 10’ low voltage leads which exit from the rear at the left or right end

Included standard remote 120-277V driver offered with 0-10V dimming or non-dim (other dimming driver options available)

Remote mounted emergency battery backup available (ordered separately, consult factory for details)

Standard light outputs are 550 or 750 lumens per foot

LEDs available in 2700K, 3000K, 3500K and 4000K, within a 3 step MacAdam ellipse, all with 90+ CRI typical

Life: 50,000 hours L70

Limited five year warranty

UL and C-UL listed for dry and damp locations

IBEW manufactured and assembled

Made in U.S.A.

Product Data

Nominal Fixture Length

  • 23: 23”
  • 34: 34”
  • 45: 45”
  • 56: 56”
  • 67: 67”
  • 78: 78”
  • 89: 89”

Actual dimension dependent on run configuration

Correlated Color Temperature

  • 27: 2700K-90+ CRI
  • 30: 3000K-90+ CRI
  • 35: 3500K-90+ CRI
  • 40: 4000K-90+ CRI

Driver

  • ND: non-dimming
  • D: 0-10V, 1%
  • DTR: triac, 1%
  • DLV: electronic low voltage, 1%
  • HES: Lutron EcoSystem, soft-on/fade-to-black, 1%
  • EL: eldoLED ECOdrive 0-10V, 1%
  • ES: eldoLED SOLOdrive 0-10V, 0.1%
  • ELD: eldoLED ECOdrive DALI, 1%
  • ESD: eldoLED SOLOdrive DALI, 0.1%

Note: Each fixture includes a remote driver matched for fixture length and light output

Light Output

(lumens per foot)

  • L: low – 550
  • R: regular – 750
  • CF: consult factory for custom wattage

Run Configuration

  • SN: single
  • ST: starter
  • AD: adder
  • TR: terminator

Lens Orientation

  • 1: indirect light

Section

BSS710 section

Mounting Options

  • Use appropriate fastener through provided holes in the mounting cleat
  • Fixture housing locks onto mounting cleat with installed Philips head screws

Ordering Code: N/A

Ready To Illuminate
Your Next Project?

Find your nearest Bartco rep now