BODHI FLUSH LENS BSS225

2-1/8” wide LED luminaire with flush lens, remote driver

CutsheetExplore Bodhi

Downloads

Features

The BSS225 is a low profile, remote driven, linear LED luminaire for general lighting applications. The 2” tall by 2-1/8” wide extruded aluminum housing is capped with a flat, frosted lens that produces diffuse, seamless illumination. 1/4” thick machined aluminum end caps finish off the fixture ends.

Finishes

Architectural White (semi-matte)
AW
Architectural White (semi-matte)
White (semi-gloss)
WH
White (semi-gloss)
Black (semi-matte)
BL
Black (semi-matte)
Matte Black
MB
Matte Black
Environmental Satin Silver
ESS
Environmental Satin Silver
Bronze
BZ
Bronze
Primer
PR
Primer
Satin Anodize
SA
Satin Anodize
Inquire about custom finishes

Performance

  • Nominal Length: 4'
  • Output: L: low | R: regular | H: high
  • Lumens/ft.: L: 500 | R: 650 | H: 850
  • Watts/ft.: L: 5.5 | R: 7.6 | H: 10.6
  • Luminaire Lumens: L: 1874 | R: 2434 | H: 3198
  • Efficacy (LPW): L: 91 | R: 85 | H: 81

Note: All data reflects fixtures with 3500K LEDs and wide light distribution

Specifications

Fixture constructed of an extruded aluminum housing, extruded, frosted acrylic lens and machined aluminum end caps

Model variations offered for surface or cable suspended applications and with wide or narrow light distributions

Field adjustable cable hangers can be located at nearly any point along the fixture length

Standard finishes include architectural white (semi-matte), white (semi-gloss), black (semi-matte), matte black, environmental satin silver (alternative to anodize), bronze and primer powder coat, applied post production (consult factory for custom finishes)

Satin anodize finish also available (may require additional lead time)

Available in nominal lengths of 2’–8’ as single fixtures and continuous runs

Surface mount fixtures wired with 10’ low voltage leads

Included standard remote 120-277V driver offered with 0-10V dimming or non-dim (other dimming driver options available)

Remote mounted emergency battery backup available (ordered separately, consult factory for details)

Standard outputs are 500, 650 and 850 lumens per foot

LEDs available in 2700K, 3000K, 3500K, and 4000K, within a 3 step MacAdam ellipse, all with 90+ CRI typical

Life: 50,000 hours L70

Limited five year warranty

UL and CUL listed for dry and damp locations

Limited five year warranty

IBEW manufactured and assembled

Made in U.S.A.

Product Data

Nominal Fixture Length

  • 2: 23”
  • 3: 34”
  • 4: 45”
  • 5: 56”
  • 6: 67”
  • 7: 78”
  • 8: 89”

Actual dimension dependent on run configuration

Correlated Color Temperature

  • 27:2700K-90+ CRI
  • 30: 3000K-90+ CRI
  • 35: 3500K-90+ CRI
  • 40: 4000K-90+ CRI

Driver

  • ND: non-dimming
  • D: 0-10V, 1%
  • HES: Lutron EcoSystem, soft-on/fade-to-black, 1%
  • H2: Lutron Hi-lume 2-wire forward phase, 1%, (120V ONLY)
  • EL: eldoLED ECOdrive, 0-10V, 1%

Note: Each fixture includes a remote driver matched for fixture length and light output.

Mounting

  • SM: surface mount
  • C4: cable mount 4’ cable length
  • C8: cable mount 8’ cable length
  • CF: consult factory for custom mounting

Light Output

(lumens per foot)

  • L: low – 500
  • R: regular – 650
  • H: high – 850
  • CF: consult factory for custom output

Run Configuration

  • SN: single
  • ST: starter
  • AD: adder
  • TR: terminator

Options

  • W: wide
  • N: narrow

Sections

Wide distribution

Narrow distribution

Mounting Options

Surface Mount
  • Use appropriate fastener through Ø3/16” holes in housing
  • 10’ low voltage leads exit out the rear at an end

Ordering Code: SM

Cable Mount
  • Extruded aluminum cable hanger bracket (can be located at any at nearly any point along the fixture length)
  • Ø 1/16”x 48” (C4) or 96” (C8) aircraft cables
  • 18 gauge x 60” (C4) or 108” (C8) power cable (in coordinating finish)
  • Bracket bars
  • Ø 5” white canopies
  • Ceiling couplers
  • Side exit cable grippers

Ordering Code: C4 and C8

Ready To Illuminate
Your Next Project?

Find your nearest Bartco rep now