BSS240

BODHI INDIRECT BSS240

2-1/2” square indirect LED luminaire

CutsheetExplore Bodhi

Downloads

Features

The BSS240 is a cable suspended, indirect LED luminaire for general lighting applications. The 2-1/2” square, extruded aluminum housing is capped with a flush, frosted acrylic lens to produce diffuse light on the ceiling surface. 1/4” thick machined aluminum end caps finish off the fixture ends.

Finishes

Architectural White (semi-matte)
AW
Architectural White (semi-matte)
White (semi-gloss)
WH
White (semi-gloss)
Black (semi-matte)
BL
Black (semi-matte)
Matte Black
MB
Matte Black
Environmental Satin Silver
ESS
Environmental Satin Silver
Bronze
BZ
Bronze
Primer
PR
Primer
Satin Anodize
SA
Satin Anodize
Inquire about custom finishes

Performance

  • Nominal Length: 46"
  • Watts/ft: 6.2
  • Total Watts: 23.9
  • Luminaire Lumens: 2509
  • Efficacy: 105

Note: All data reflects fixtures with 3500K LEDs

Specifications

Fixture constructed of extruded aluminum housing, frosted extruded acrylic lens and machined aluminum end caps

Standard finishes include architectural white (semi-matte), white (semi-gloss), black (semi-matte), matte black, environmental satin silver (alternative to anodize), bronze and primer powder coat, applied post production (consult factory for custom finishes)

Satin anodize finish also available (may require additional lead time)

Available in nominal lengths of 2’–8′ single fixtures and continuous runs

Basic continuous run fixtures provided with 18 ga. wiring harness for 6 Amp maximum load (consult factory for runs requiring sensor integration, etc.)

Standard integral 120-277V driver offered with 0-10V dimming or non-dim (other dimming driver options available)

Remote mounted emergency battery backup available (ordered separately, consult factory for details)

Standard light outputs are 6W and 8W nominal per foot

LEDs available in 3000K, 3500K, 4000K, 5000K, all with a typical 84-85 CRI and color consistency within a 3 step MacAdam ellipse

Life: 50,000 hours L70

Passive infrared occupancy sensor option available (for 46” and longer fixtures)

Limited five year warranty

UL and C-UL listed for dry and damp locations

IBEW manufactured and assembled

Made in U.S.A.

Product Data

Nominal Fixture Length

  • 24: 24-1/4”
  • 35 35-1/4”
  • 46: 46-1/4”
  • 57: 57-1/4”
  • 68: 68-1/4”
  • 79: 79-1/4”
  • 90: 90-1/4”

Actual dimension dependent on run configuration

Correlated Color Temperature

  • 30: 3000K-84 CRI
  • 35: 3500K-85 CRI
  • 40: 4000K-85 CRI
  • 50: 5000K-85 CRI

Driver

  • ND: non-dimming
  • D: 0-10V, 1%
  • DTR: triac, 1%
  • DLV: electronic low voltage, 1%
  • HES: Lutron EcoSystem, soft-on/fade-to-black, 1%
  • EL: eldoLED ECOdrive 0-10V, 1%
  • ES: eldoLED SOLOdrive 0-10V, 0.1%
  • ELD: eldoLED ECOdrive DALI, 1%
  • ESD: eldoLED SOLOdrive DALI, 0.1%

Watts/Foot

  • 6: 6.2 W/ft.
  • 8: 8 W/ft.
  • CF: consult factory for custom output

Mounting

  • C4: cable mount 4' cable length
  • C8: cable mount 8' cable length
  • CF: consult factory for custom mounting

Run Configuration

  • SN: single
  • ST: starter
  • AD: adder
  • TR: terminator

Options

  • S1A: occ sensor pos.1, 100%–0% (see options section)
  • S1B: occ sensor pos.1, 100%–50% (see options section)

Section

BSS240 section

Mounting Options

BSS240 cable mount
Cable Mount
  • Ø 1/16”x 48” (C4) or 96” (C8) aircraft cables
  • 18 gauge x 60” (C4) or 108” (C8) SJT power cable (in coordinating finish)
  • Bracket bars
  • Ø 5” white canopies
  • Ceiling couplers
  • Side exit cable grippers

Ordering Code: C4 and C8

Ready To Illuminate
Your Next Project?

Find your nearest Bartco rep now