BSS220 photo

Bodhi Flush Lens BSS220

1-25/32” wide LED luminaire with flush lens, remote driver

CutsheetExplore Bodhi

Downloads

Features

The BSS220 is a low profile, remote driven, linear LED luminaire for general lighting applications. The 2” tall by 1-25/32” wide extruded aluminum housing is capped with a flat, frosted lens that produces diffuse, seamless illumination. 1/4” thick machined aluminum end caps finish off the fixture ends.

Finishes

Architectural White (semi-matte)
AW
Architectural White (semi-matte)
White (semi-gloss)
WH
White (semi-gloss)
Black (semi-matte)
BL
Black (semi-matte)
Matte Black
MB
Matte Black
Environmental Satin Silver
ESS
Environmental Satin Silver
Bronze
BZ
Bronze
Primer
PR
Primer
Satin Anodize
SA
Satin Anodize
Inquire about custom finishes

Performance

  • Nominal Length: 45"
  • Watts/ft: 8.4
  • Total Watts: 32.1
  • Luminaire Lumens: 2861
  • Efficacy: 89

Note: All data reflects fixtures with 3500K LEDs

Specifications

Fixture constructed of an extruded aluminum housing, extruded, frosted acrylic lens and machined aluminum end caps

Model variations offered for surface, and cable suspended applications

Standard finishes include architectural white (semi-matte), white (semi-gloss), black (semi-matte), matte black, environmental satin silver (alternative to anodize), bronze and primer powder coat, applied post production (consult factory for custom finishes)

Satin anodize finish also available (may require additional lead time)

Available in nominal lengths of 2’–8’ as single fixtures and continuous runs

Surface and mount fixtures wired with 10’ low voltage leads

Included standard remote 120-277V driver offered with 0-10V dimming or non-dim (other dimming driver options available)

Remote mounted emergency battery backup available (ordered separately, consult factory for details)

Standard outputs are 5W and 8W nominal per foot

LEDs available in 2700K, 3000K, 3500K, and 4000K, within a 3 step MacAdam ellipse, all with 90+ CRI typical

Life: 50,000 hours L70

UL and CUL listed for dry and damp locations

Limited five year warranty

IBEW manufactured and assembled

Made in U.S.A.

Product Data

Nominal Fixture Length

  • 2: 23”
  • 3: 34”
  • 4: 45”
  • 5: 56”
  • 6: 67”
  • 7: 78”
  • 8: 89”

Actual dimension dependent on run configuration

Correlated Color Temperature

  • 27: 2700K-90+ CRI
  • 30: 3000K-90+ CRI
  • 35: 3500K-90+ CRI
  • 40: 4000K-90+ CRI

Driver

  • ND: non-dimming
  • D: 0-10V, 1%
  • DTR: triac, 1%
  • DLV: electronic low voltage, 1%
  • HES: Lutron EcoSystem, soft-on/fade-to-black, 1%
  • EL: eldoLED ECOdrive, 0-10V, 1%
  • ES: eldoLED SOLOdrive 0-10V, 0.1%
  • ELD: eldoLED ECOdrive DALI, 1%
  • ESD: eldoLED SOLOdrive DALI, 0.1%

Note: Each fixture includes a remote driver matched for fixture length and light output

Watts/Foot

  • 5: 5 W/ft.
  • 8: 8.4 W/ft.
  • CF: consult factory for custom output

Mounting

  • SM: surface mount
  • C4: cable mount 4’ cable length
  • C8: cable mount 8’ cable length
  • CF: consult factory for custom mounting

Run Configuration

  • SN: single
  • ST: starter
  • AD: adder
  • TR: terminator

Section

Mounting Options

bss220 surface mount
Surface Mount
  • Use appropriate fastener through Ø3/16” holes in housing
  • 10’ low voltage leads exit out the rear at an end

Ordering Code: SM

bss220 cable mount
Cable Mount

Mounting options include:

  • Ø 1/16”x 48” (C4) or 96” (C8) aircraft cables
  • 18 gauge x 60” (C4) or 108” (C8) power cable (in coordinating finish)
  • Bracket bars
  • Ø 5” white canopies
  • Ceiling couplers
  • Side exit cable grippers

Ordering Code: C4 & C8

Ready To Illuminate
Your Next Project?

Find your nearest Bartco rep now