FAUX|REAL FAUX31

2” wide direct/indirect LED luminaire with simulated wood finish

CutsheetExplore Faux|Real

Downloads

Features

The Faux series of luminaires is comprised of architectural linear profiles finished with realistic imagery that makes the fixture appear to be made of natural wood. In addition to the standard wood-look finishes, nearly limitless custom options are possible, for simulating unique materials, branding reinforcement and interior design coordination. The FAUX31 direct/indirect model is 2” wide by 3-1/2” tall and is offered with multiple optic options for cable or wall mount installations.

Finishes

FXW
Faux Walnut
FXC
Faux Cherry
FXP
Faux Pine
FXWO
Faux White Oak
CF
Custom Faux Finish
Inquire about custom finishes

Lens Options

Flush Lens

Flush frosted acrylic extrusion (Note: faux finish not shown)

Ordering Code: A

Drop Lens – Solid End

1” H frosted acrylic extrusion with full height aluminum end cap (Note: faux finish not shown)

Ordering Code: B

Drop Lens – Luminous End

1” H frosted acrylic extrusion with matching acrylic end cap (Note: faux finish not shown)

Ordering Code: C

Louver

Parabolic louver with 5/8” blades at 1” spacing, formed from diffuse, high reflectance aluminum and supplied with light diffusion film. Available for 4’ and 8’ nominal length fixtures. (Note: faux finish not shown)

Ordering Code: D

Specifications

Fixture constructed of extruded aluminum housing, frosted extruded acrylic lenses and machined aluminum end caps

Model variations offered for wall mount and cable suspended applications

Four standard simulated wood finishes available along with nearly limitless custom options

Finish comprised of a multi-stage application process that produces durable, high resolution imagery

Available in nominal lengths of 2’–8’ single fixtures and continuous runs

Basic continuous run fixtures provided with 18 ga. wiring harness for 6 Amp maximum load (consult factory for runs requiring multiple circuits, sensor integration, etc.)

Standard integral 120-277V driver offered with 0-10V dimming or non-dim (other dimming driver options available)

Integral 120-277V emergency battery backup available for 6’ or 8’ nominal, single circuit non-dim or 0-10V (consult factory for all other lengths/drivers)

Standard outputs are 500 or 650 lumens per foot direct and 465 or 600 lumens per foot indirect

LEDs available in 2700K, 3000K, 3500K and 4000K, within a 3 step MacAdam ellipse, all with 90+ CRI typical

Life: 50,000 hours L70

UL and C-UL listed for dry and damp locations

Limited five year warranty

IBEW manufactured and assembled

Made in U.S.A.

Product Data

Nominal Fixture Length

  • 2: 22-5/8”
  • 3: 33-5/8”
  • 4: 44-5/8”
  • 5: 55-5/8”
  • 6: 66-5/8”
  • 7: 77-5/8”
  • 8: 88-5/8”

Correlated Color Temperature

  • 27: 2700K-90+ CRI
  • 30: 3000K-90+ CRI
  • 35: 3500K-90+ CRI
  • 40: 4000K-90+ CRI

Driver

  • ND: non-dimming
  • D: 0-10V, 1%
  • HES: Lutron EcoSystem, soft-on/fade-to-black, 1%
  • H2: Lutron Hi-lume 2-wire forward phase, 1%, (120V ONLY)
  • EL: eldoLED ECOdrive 0-10V, 1%

Mounting

  • WM: wall mount
  • C4: cable mount 4’ cable length
  • C8: cable mount 8’ cable length
  • CF: consult factory for custom mounting

Light Output

(lumens per foot)

  • Indirect | L: low – 465 (w/ optic option 1)
  • Indirect | R: regular – 600 (w/ optic option 1)
  • Indirect | CF: consult factory for custom output
  • Direct | L: low – 500 (w/ optic option B)
  • Direct | R: regular – 650 (w/ optic option B)
  • Direct | CF: consult factory for custom output

Run Configuration

  • SN: single
  • ST: starter
  • AD: adder
  • TR: Terminator

Lens

Indirect Optic and Direct Optic

  • Indirect | 1: general Lambertian distribution
  • Indirect | 2: batwing distribution
  • Direct | A: flush lens
  • Direct | B: drop lens – solid end
  • Direct | C: drop lens – luminous end
  • Direct | D: louver (4' and 8' only)

Options

  • ED: emergency driver (6’ or 8’ SINGLE CIRCUIT, non-dim or 0-10V only) distribution

Sections

Shown with batwing optic and flush lens options

Shown with Lambertian optic and drop lens options

Mounting Options

Wall Mount
  • 1-7/8”H x 4-1/2”W aluminum bracket projects the fixture housing 3/4” from the wall surface

Ordering Code: WM

Cable Mount

NOTE: WHEN DUAL CIRCUIT OPTION IS USED, TWO POWER CABLES ARE REQUIRED

  • Ø 1/16”x 48” (C4) or 96” (C8) aircraft cables
  • 60” (C4) or 108” (C8) power cable in coordinating finish
  • Bracket bars
  • Ø 5” white canopies
  • Ceiling couplers
  • Side exit cable grippers

Ordering Code: C4 and C8

Related Products

Ready To Illuminate
Your Next Project?

Find your nearest Bartco rep now