
Downloads
- Documentation
- Photometry
Features
The BSW755 is a corner mount, linear LED luminaire well suited for outdoor lighting. The 4-1/4” x 4-1/4” extruded aluminum housing tucks into architectural junctures and fitted with a two-sided, frosted acrylic lens. When installed, virtually no fixture housing is visible, leaving the evenly illuminated lens to make a strong visual statement
Finishes







Performance
- Nominal Length: 4'
- Output: L: low | R: regular | H: high
- Lumens/ft.: L: 445 | R: 890 | H: 1145
- Watts/ft.: L: 4.0 | R: 8.0 | H: 10.3
- Luminaire Lumens: L: 1774 | R: 3552 | H: 4572
- Efficacy (LPW): L: 111 | R: 111 | H: 111
Note: All data reflects fixtures with 3500K LEDs
Specifications
Fixture constructed of an extruded aluminum housing, frosted, extruded acrylic lens and sheet aluminum end caps
Standard finishes include architectural white (semi-matte), white (semi-gloss), black (semi-matte), matte black, environmental satin silver (alternative to anodize), bronze and primer powder coat, applied post production (consult factory for custom finishes)
Available in nominal lengths of 2’–8’ single fixtures and continuous runs
Housing provided with a Ø7/8 hole for back feeding
Standard integral 120-277V wet location driver offered with 0-10V dimming or non-dim
Standard outputs are 445, 890 and 1145 lumens per foot
LEDs available in 2700K, 3000K, 3500K, and 4000K, within a 3 step MacAdam ellipse, all with 80+ CRI typical
Life: 50,000 hours L70
Limited five year warranty
UL and C-UL listed for wet locations
IBEW manufactured and assembled
Made in U.S.A.
Product Data

Nominal Fixture Length
- 2: 24-5/8”
- 3: 36-5/8”
- 4: 48-5/8”
- 5: 60-5/8”
- 6: 72-5/8”
- 7: 84-5/8”
- 8: 96-5/8”
Actual dimension dependent on mounting option and run configuration
Correlated Color Temperature
- 27: 2700K-80+ CRI
- 30: 3000K-80+ CRI
- 35: 3500K-80+ CRI
- 40: 4000K-80+ CRI
Driver
- IN: non-dimming
- ID: 0-10V dimming, 5%
Mounting
- SM: surface mount
Light Output
(lumens per foot)
- L: low – 445
- R: regular – 890
- H: high – 1145
Run Configuration
- SN: single
- ST: starter
- AD: adder
- TR: terminator
Section

Mounting Options

- Use appropriate fastener through Ø3/16” holes in housing
- Power entry through Ø7/8 hole on the back at an end
Ordering Code: SM