2” wide direct/indirect LED luminaire

CutsheetExplore Bodhi


BSS255 installation photo



The Bodhi series BSS255 a rectilinear direct/indirect LED luminaire for general lighting applications. The 2” wide by 3-1/2” high extruded aluminum housing is offered for wall or cable suspended mounting. The two LED sources can be configured independently for both switching and lumen output. The BSS255 is Controls Capable, being offered with a variety of integrated control options.


Architectural White (semi-matte)
Architectural White (semi-matte)
White (semi-gloss)
White (semi-gloss)
Black (semi-matte)
Black (semi-matte)
Matte Black
Matte Black
Environmental Satin Silver
Environmental Satin Silver
Satin Anodize
Satin Anodize
Inquire about custom finishes

Lens Options

Flush Lens

Flush frosted acrylic extrusion

Ordering Code: A

Drop Lens – Solid End

1” H frosted acrylic extrusion with full height aluminum end cap

Ordering Code: B

Drop Lens – Luminous End

1” H frosted acrylic extrusion with matching acrylic end cap

Ordering Code: C


2” W Flat blade louver with 5/8” blades at 7/8” spacing, formed from sheet steel. Finish is Environmental Satin Silver (consult factory for alternate finishes). Supplied with light diffusion film.

Ordering Code: D

Wall Wash

Acrylic extrusion with optically engineered Fresnel prisms for wall wash applications Available for Cable (C4,C8) mounting only. Optimized for placement 18”–24” from a wall surface. Uniformity ratio as low as 4:1.

Ordering Code:


Fixture constructed of extruded aluminum housing, extruded acrylic lenses and machined aluminum end caps.

Model variations offered for wall mount and cable suspended applications.

Indirect optic options include Lambertian or batwing distributions while direct options include flush and drop frosted lenses, acrylic Fresnel wall wash lens (for cable mount fixtures) and flat blade louver.

Standard finishes include architectural white (semi-matte), white (semi-gloss), black (semi-matte), matte black, environmental satin silver (alternative to anodize), bronze and primer powder coat, applied post production (consult factory for custom finishes).

Satin anodize finish also available (may require additional lead time).

Available in nominal lengths of 2’–8’ single fixtures and continuous runs.

Basic continuous run fixtures provided with 18 ga. wiring harness for 6 Amp maximum load (consult factory for runs requiring multiple circuits, sensor integration, etc.).

Standard integral 120-277V driver offered with 0-10V dimming or non-dim (other dimming driver options available).

Integral 120-277V emergency battery backup available for 4’ or 8’ nominal, single circuit non-dim or 0-10V (consult factory for all other lengths/drivers).

Standard light outputs range from 470–790 lumens per foot for the direct source and 460–740 lumens per foot for the indirect source, depending on optic options.

LEDs available in 2700K, 3000K, 3500K and 4000K, within a 3 step MacAdam ellipse, all with 90+ CRI typical.

Bartco Lighting Controls Capable fixture available with integrated controls from a variety of suppliers.

Life: 50,000 hours L70.

Limited five year warranty.

UL and C-UL listed for dry and damp locations.

IBEW manufactured and assembled.

Made in U.S.A.

Product Data

Nominal Fixture Length

  • 2: 22-5/8”
  • 3: 33-5/8”
  • 4: 44-5/8”
  • 5: 55-5/8”
  • 6: 66-5/8”
  • 7: 77-5/8”
  • 8: 88-5/8”

Actual dimension dependent on run configuration.

Correlated Color Temperature

  • 27: 2700K-90+ CRI
  • 30: 3000K-90+ CRI
  • 35: 3500K-90+ CRI
  • 40: 4000K-90+ CRI


  • ND: non-dimming
  • D: 0-10V, 1%
  • DTR: triac, 1%, (120V ONLY)
  • DLV: electronic low voltage, 1%, (120V ONLY)
  • HES: Lutron EcoSystem, soft-on/fade-to-black, 1%
  • EL: eldoLED ECOdrive 0-10V, 1%
  • ES: eldoLED SOLOdrive 0-10V, 0.1%
  • ELD: eldoLED ECOdrive DALI, 1%
  • ESD: eldoLED SOLOdrive DALI, 0.1%


  • WM: wall mount
  • C4: cable mount 4’ cable length
  • C8: cable mount 8’ cable length
  • CF: consult factory for custom mounting

Light Output

Direct Output and Indirect Output (lumens per foot)

  • Direct | L: low – 500 (w/ optic option B)
  • Direct | R: regular – 650 (w/ optic option B)
  • Indirect | L: low – 465 (w/ optic option 1)
  • Indirect | R: regular – 600 (w/ optic option 1)
  • CF: consult factory for custom output

Run Configuration

  • SN: single
  • ST: starter
  • AD: adder
  • TR: terminator


Direct Optic and Indirect Optic

  • Direct | A: flush lens
  • Direct | B: drop lens – solid end
  • Direct | C: drop lens – luminous end
  • Direct | D: louver
  • Direct | E: wall wash
  • Indirect | 1: general lambertain distribution
  • Indirect | 2: batwing distribution


  • ED: emergency driver (4’ or 8' SINGLE CIRCUIT, non-dim or 0-10V only)
  • WS1A: Wattstopper FS-205, 100%-0% *
  • WS1B: Wattstopper FS-205, 100%-50% *
  • EN1: Enlighted FS-D22 *
  • ES4: Philips EasySense SNS211 MC *
  • CA1: Casambi CBU-A2D *
  • NL1: nLight RES7 *
  • NL2: nLight RIO *
  • LA1: Lutron Athena A-WND01- RF-WH *
  • LA2: Lutron Athena A-WND01- OCC-WH *

* See Integrated Controls section for driver compatibility information.


  • 1: single circuit
  • 2: two circuit (4' nominal length and longer)


Shown with batwing optic and flush lens options

BSS255 section with batwing optic and flush lens options

Shown with Lambertian optic and drop lens options

BSS255 section with Lambertian optic and drop lens options

Mounting Options

BSS255 cable mount
Cable Mount


  • Ø 1/16”x 48” (C4) or 96” (C8) aircraft cables
  • 60” (C4) or 108” (C8) power cable in coordinating finish
  • Bracket bars
  • Ø 5” white canopies
  • Ceiling couplers
  • Side exit cable grippers

Ordering Code: C4 and C8

BSS255 wall mount
Wall Mount
  • 1-7/8”H x 4-1/2”W aluminum bracket projects the fixture housing 3/4” from the wall surface

Ordering Code: WM

Ready To Illuminate
Your Next Project?

Find your nearest Bartco rep now