BSS208 photo

Bodhi flush Lens BSS208

2” wide LED luminaire with flush lens

CutsheetExplore Bodhi

Downloads

Features

The BSS208 is a linear LED luminaire for general lighting applications. The 2” wide by 3” tall extrusion is fitted with a flush, frosted lens and machined aluminum end caps. Surface, cable or wall mounting options are available, as well as a variety of dimming drivers and light outputs, to maximize the versatility of this clean design luminaire.

For a corresponding recessed fixture, see BSS420.

Available for QuickShip.

Finishes

Architectural White (semi-matte)
AW
Architectural White (semi-matte)
White (semi-gloss)
WH
White (semi-gloss)
Black (semi-matte)
BL
Black (semi-matte)
Matte Black
MB
Matte Black
Environmental Satin Silver
ESS
Environmental Satin Silver
Bronze
BZ
Bronze
Primer
PR
Primer
Satin Anodize
SA
Satin Anodize
Inquire about custom finishes

Performance

  • Nominal Length: 4'
  • Output: L: low | R: regular | H: high
  • Lumens/ft.: L: 485 | R: 625 | H: 825
  • Watts/ft.: L: 5.6 | R: 7.8 | H: 10.8
  • Luminaire Lumens: L: 1795 | R: 2331 | H: 3063
  • Efficacy (LPW): L: 86 | R: 81 | H: 76

Note: All data reflects fixtures with 3500K LEDs and Lambertian distribution option

Specifications

Fixture constructed of an extruded aluminum housing, extruded, frosted acrylic lens and machined aluminum end caps

Model variations offered for surface, wall mount and cable suspended applications with Lambertian and Asymmetric distribution options

Standard finishes include architectural white (semi-matte), white (semi-gloss), black (semi-matte), matte black, environmental  satin silver (alternative to anodize), bronze and primer powder coat, applied post production (consult factory for custom finishes)

Satin anodize finish also available (may require additional lead time)

Available in nominal lengths of 2’–8’ single fixtures and continuous runs

Basic continuous run fixtures provided with 18 ga. wiring harness for 6 Amp maximum load (consult factory for runs requiring multiple circuits, sensor integration, etc.)

Standard integral 120-277V driver offered with 0-10V dimming or non-dim (other dimming driver options available)

Integral 120-277V emergency battery backup available for 4’ nominal non-dim or 0-10V (consult factory for all other lengths/ drivers)

Standard light outputs range from 485 to 1200 lumens per foot, depending on optic option

LEDs available in 2700K, 3000K, 3500K and 4000K, within a 3 step MacAdam ellipse, all with 90+ CRI typical

Passive infrared occupancy sensor and parabolic louver available

Life: 50,000 hours L70

UL and C-UL listed for dry and damp locations

Limited five year warranty

IBEW manufactured and assembled

Made in U.S.A.

Product Data

Nominal Fixture Length

  • 2: 22-5/8"
  • 3: 33-5/8"
  • 4: 44-5/8"
  • 5: 55-5/8"
  • 6: 66-5/8"
  • 7: 77-5/8"
  • 8: 88-5/8"

Actual dimension dependent on run configuration and sensor option

Correlated Color Temperature

  • 27: 2700K-90+ CRI
  • 30: 3000K-90+ CRI
  • 35: 3500K-90+ CRI
  • 40: 4000K-90+ CRI

Driver

  • ND: non-dimming
  • D: 0-10V, 1%
  • DTR: triac, 1%, (120V ONLY)
  • DLV: electronic low voltage, 1%, (120V ONLY)
  • HES: Lutron EcoSystem, soft-on/fade-to-black, 1%
  • EL: eldoLED ECOdrive 0-10V, 1%
  • ES: eldoLED SOLOdrive 0-10V, 0.1%
  • ELD: eldoLED ECOdrive DALI, 1%
  • ESD: eldoLED SOLOdrive DALI, 0.1%

Mounting

  • SM: surface mount
  • WD: wall mount – direct
  • WI: wall mount – indirect
  • C4: cable mount 4' cable length
  • C8: cable count 8' cable length

Light Output

(lumens per foot w/ optic option 1)

  • L: low – 485
  • R: regular – 625
  • H: high – 825
  • CF: consult factory for custom output

Run Configuration

  • SN: single
  • ST: starter
  • AD: adder
  • TR: terminator

Options

  • ED: emergency driver (4' non-dim or 0-10V only)
  • S1A: occ sensor pos. 1, 100%–0% (see options section)
  • S1B: occ sensor pos. 1, 100%–50% (see options section)
  • L: louver (4' and 8' ONLY)

Optic

  • 1: Lambertian
  • 2: Asymmetric-Direct*

* Asymmetric-Direct distribution option applies to SM, WD, C4 and C8 mounting only

Section

BSS208 section

Mounting Options

BSS208 surface mount
Surface Mount
  • Use appropriate fastener through Ø3/16” holes in housing

Ordering Code: SM

BSS208 wall mount - direct orientation
Wall Mount - Direct Orientation
  • 1-7/8” H x 2-1/2” W aluminum bracket projects the fixture housing 3/4” from the wall surface

Ordering Code: WD

BSS208 wall mount - indirect orientation
Wall Mount - Indirect Orientation
  • 1-7/8” H x 2-1/2” W aluminum bracket projects the fixture housing 3/4” from the wall surface

Ordering Code: WI

BSS208 cable mount
Cable Mount
  • Ø 1/16”x 48” (C4) or 96” (C8) aircraft cables
  • 60” (C4) or 108” (C8) power cable (in coordinating finish)
  • Bracket bars
  • Ø 5” white canopies
  • Ceiling couplers
  • Side exit cable grippers

Ordering Code: C4 and C8

Ready To Illuminate
Your Next Project?

Find your nearest Bartco rep now