FRACTALZ BFZ100-S

2-1/4” wide projecting linear LED luminaire

CutsheetExplore Fractalz

Downloads

Fractalz
Inspiration

Features

The BFZ100-S is part of the dynamic Fractalz series linear LED luminaires. The 2-1/4” square profile light fixture creates clean runs of direct, indirect or direct/indirect illumination. Additionally, the BFZ100-S model interfaces with Fractalz Recessed and Through-Space fixtures to form exciting, multi-directional lighting arrays.

Finishes

Architectural White (semi-matte)
AW
Architectural White (semi-matte)
White (semi-gloss)
WH
White (semi-gloss)
Black (semi-matte)
BL
Black (semi-matte)
Matte Black
MB
Matte Black
Environmental Satin Silver
ESS
Environmental Satin Silver
Bronze
BZ
Bronze
Primer
PR
Primer
Inquire about custom finishes

Specifications

Fixture constructed of an extruded aluminum housing, flat acrylic lens and machined aluminum end caps

Available for direct, indirect or direct/indirect configurations with Lambertian or batwing indirect optic options

Fixture ends can mount to Fractalz Through-space or Fractalz Recessed fixtures or accessory flush mount wall plates

Available in nominal lengths of 2’–8’ single fixtures and continuous runs

Depending on light source orientation, included standard driver is 120-277V remote or integral and offered with 0-10V dimming or non-dim

Standard light outputs range from 665–1000 lumens per foot for the direct source and 700–1415 lumens per foot for the indirect source

LEDs available in 2700K, 3000K, 3500K, and 4000K, within a 3 step MacAdam ellipse, all with 90+ CRI typical

Life: 50,000 hours L70

Limited five year warranty

UL and C-UL listed for dry and damp locations

IBEW manufactured and assembled

Made in U.S.A.

Product Data

Nominal Fixture Length

  • 2: 24"
  • 3: 36"
  • 4: 48"
  • 5: 60"
  • 6: 72"
  • 7: 84"
  • 8: 96"

Correlated Color Temperature

  • 27: 2700K-90+ CRI
  • 30: 3000K-90+ CRI
  • 35: 3500K-90+ CRI
  • 40: 4000K-90+ CRI

Driver

  • ND: non-dimming
  • D: dimming, 0-10V, 10%

Lens

For Indirect Optic

  • NA: not applicable
  • 1: general Lambertian distribution
  • 2: batwing distribution

Options

  • ED: emergency driver (default wired to direct source)
  • 2: dual circuit

Interface Configuration

A and B

  • E1: flat end cap
  • SU: suspended
  • TS: Through-Space
  • RE: recessed
  • WP: wall plate

Suspension / Power Feed

Power Feed requirement dependent on fixture length, direct and/or indirect source and light output options. Factory to confirm power feeds per customer supplied layout.

  • P4: 4’ aircraft cable w/power cord
  • P8: 8’ aircraft cable w/power cord
  • N4: 4’ aircraft cable, NO power
  • N8: 8’ aircraft cable, NO power

Sections

Direct

Indirect
Shown with Lambertian indirect option

Bi-Directional
Shown with batwing indirect option

Ready To Illuminate
Your Next Project?

Find your nearest Bartco rep now