TUBULAR BSS511

Ø2-1/4” arm mount LED luminaire, remote driver

CutsheetExplore Tubular

Downloads

Features

Part of the Tubular series of LED luminaires, the BSS511 is an arm mounted model ideally suited for wall wash and stack lighting. Slender aluminum arms project the Ø2-1/4” extruded aluminum housing from a wall or ceiling. A frosted acrylic lens diffuses the light from high quality diodes, while a generous range of rotation allows for flexible aiming.

Finishes

Architectural White (semi-matte)
AW
Architectural White (semi-matte)
White (semi-gloss)
WH
White (semi-gloss)
Black (semi-matte)
BL
Black (semi-matte)
Matte Black
MB
Matte Black
Environmental Satin Silver
ESS
Environmental Satin Silver
Bronze
BZ
Bronze
Primer
PR
Primer
Satin Anodize
SA
Satin Anodize
Inquire about custom finishes

Performance

  • Nominal Length: 4'
  • Output: L: low | R: regular | H: high
  • Lumens/ft.: L: 640 | R: 830 | H: 1090
  • Watts/ft.: L: 4.6 | R: 7.6 | H: 10.5
  • Luminaire Lumens: L: 2366 | R: 3073 | H: 4038
  • Efficacy (LPW): L: 138 | R: 110 | H: 104

Note: All data reflects fixtures with 3500K LEDs

Specifications

Fixture housing constructed of an extruded aluminum tube, frosted acrylic extruded lens and sheet aluminum end caps

Fixture arms are constructed of steel pipe, Ø5/8” extruded aluminum sleeves and machined aluminum end cap couplers

Mounting plate options include a Ø4-3/4” aluminum plate for mounting to 4” octagonal wall boxes or Ø1-3/8” aluminum plate for mounting to accessible panels

Standard finishes include architectural white (semi-matte), white (semi-gloss), black (semi-matte), matte black, environmental  satin silver (alternative to anodize), bronze and primer powder coat, applied post production (consult factory for custom finishes)

Satin anodize finish also available (may require additional lead time)

Single and continuous run fixtures available with arm center distances of 24”-68” nominal

Arms allow fixture to project from a wall or ceiling nominally 4”, 6”, 12” or 18”

Fixture housing rotates 332° and is locked in place with hex fastener

Included standard remote 120-277V driver offered with 0-10V dim- ming or non-dim (other dimming driver options available)

Remote mounted emergency battery backup available (ordered separately, consult factory for details)

Fixture wired with 10’, low voltage leads (measured from the end cap)

Standard outputs are 640, 830 and 1090 lumens per foot

LEDs available in in 2700K, 3000K, 3500K, and 4000K, within a 3 step MacAdam ellipse, all with 90+ CRI typical
LED Driver

Life: 50,000 hours L70

Limited five year warranty

UL and C-UL listed for dry and damp locations

IBEW manufactured and assembled

Made in U.S.A.

Product Data

Nominal Fixture Length

  • 2: 24”
  • 3: 35”
  • 4: 46”
  • 5: 57”
  • 6: 68”

Correlated Color Temperature

  • 27: 2700K - 90+ CRI
  • 30: 3000K - 90+ CRI
  • 35: 3500K - 90+ CRI
  • 40: 4000K - 90+ CRI

Driver

  • ND: non-dimming
  • D: 0-10V, 1%
  • HE: Lutron EcoSystem, 1%
  • HES: Lutron EcoSystem, soft-on/fade-to-black, 1%
  • H2: Lutron Hi-lume 2-wire forward phase, 1%, (120V ONLY)
  • E5: Lutron EcoSystem 5-Series, 5%
  • EL: eldoLED ECOdrive, 0-10V, 1%

Each fixture includes a remote driver matched for fixture length and light output

Mounting

  • WBR: wall box plate
  • TP: trim plate

Light Output

(lumens per foot)

  • L: low – 640
  • R: regular – 830
  • H: high – 1090
  • CF: consult factory for custom output

Run Configuration

  • SN: single
  • ST: starter
  • AD: adder
  • TR: terminator

Nominal Arm Length

  • 4: 4"
  • 6: 6"
  • 12: 12"
  • 18: 18"
  • CF: consult factory for custom arm length

Ready To Illuminate
Your Next Project?

Find your nearest Bartco rep now