Fathom BSW511

• Documentation
  • Cut Sheet
  • Remote Driver Info
  • Sell Sheet
• Photometry
  • PDF
  • IES

The BSW511 is a wet location, arm mounted LED luminaire, ideally suited for wall wash and facade lighting. Slender aluminum arms project the Ø2-1/4” extruded aluminum housing from a wall or ceiling. A frosted acrylic lens diffuses the light from high quality diodes, while a generous range of rotation allows for flexible aiming. Each fixture is paired with a remote mounted, wet location 0-10V dimming or non-dimming driver and housing.

• Nominal Length: 4'
• Output: L: low | R: regular | H: high
• Lumens/ft.: L: 640 | R: 830 | H: 1090
• Watts/ft.: L: 4.6 | R: 7.6 | H: 10.5
• Luminaire Lumens: L: 2366 | R: 3073 | H: 4038
• Efficacy (LPW): L: 138 | R: 110 | H: 104

Note: All data reflects fixtures with 3500K LEDs

Fixture housing constructed of an extruded aluminum tube, frosted acrylic extruded lens and sheet aluminum end caps.

Fixture arms are constructed of zinc plated steel pipe Ø5/8” extruded aluminum sleeves and machined aluminum end cap couplers.

Mounting plate options include a Ø4-3/4” aluminum plate for mounting to 4” octagonal wall boxes or Ø1-3/8” aluminum plate for mounting to accessible panels.

Standard finishes as shown below.

Single and continuous run fixtures available with arm center distances of 2’–5’ nominal.

Arms allow fixture to project from a wall or roofline nominally 4”, 6”, 12” or 18”.

Fixture housing rotates 332° and is locked in place with hex fastener.

Included remote 120-277V wet location driver offered with 0-10V dimming or non-dim and surface mount aluminum enclosure.

Fixture wired with 10’, low voltage leads (measured from the end cap).

Standard outputs are 640, 830 and 1090 lumens per foot.

LEDs available in 2700K, 3000K, 3500K, and 4000K, within a 3 step MacAdam ellipse, all with 90+ CRI typical.

Life: 50,000 hours L₇₀.

Limited five year warranty.

UL and C-UL listed for wet locations.

IBEW manufactured and assembled.

Made in U.S.A.