TubularBSS501

Part of the Tubular family of LED luminaires, the BSS501 is an arm mounted model ideally suited for wall wash and stack lighting.  Slender aluminum arms project the Ø1-3/8” extruded aluminum housing from a wall or ceiling.  A frosted acrylic lens diffuses the light from high quality diodes, while a generous range of rotation allows for flexible aiming.

- > Products > BSS501

Part of the Tubular family of LED luminaires, the BSS501 is an arm mounted model ideally suited for wall wash and stack lighting.  Slender aluminum arms project the Ø1-3/8” extruded aluminum housing from a wall or ceiling.  A frosted acrylic lens diffuses the light from high quality diodes, while a generous range of rotation allows for flexible aiming.

  • Fixture housing constructed of an extruded aluminum tube, frosted acrylic extruded lens and sheet aluminum end caps
  • Fixture arms are constructed of steel pipe, Ø5/8” extruded aluminum sleeves and machined aluminum end cap couplers.
  • Mounting plate options include a Ø4-3/4” aluminum plate for mounting to 4” octagonal wall boxes or Ø1-3/8” aluminum plate for mounting to accessible panels.
  • Standard finishes as shown below
  • Single and continuous run fixtures available with arm center distances of 24”-90” 
  • Arms allow fixture to project from a wall or ceiling nominally 3”, 6”, 12” or 18”
  • Fixture housing rotates 332° and is locked in place with hex fastener
  • Included standard remote 120-277V driver offered with 0-10V dimming or non-dim (other dimming driver options available)
  • Fixture wired with 10’, low voltage leads (measured from the end cap)
  • Standard outputs are 400 and 525 lumens per foot
  • LEDs available in 2700K, 3000K, 3500K, and 4000K, within a 3 step MacAdam ellipse, all with 90+ CRI typical
  • Life: 50,000 hours L70
  • Limited five year warranty
  • UL and C-UL listed for dry and damp locations
  • IBEW manufactured and assembled
  • Made in U.S.A.

Product Downloads

Options
DIM | EM | CU