BODHI INDIRECT BSS255

Rectilinear bi-directional LED luminaire

Cutsheet

Downloads

Features

The Bodhi series BSS255 a rectilinear bi-directional LED luminaire for general lighting applications. The 2” wide by 3-1/2” high extruded aluminum housing is offered for wall or cable suspended mounting. The two LED sources can be configured independently for both switching and lumen output.

Finishes

Architectural White (semi-matte)
AW
Architectural White (semi-matte)
White (semi-gloss)
WH
White (semi-gloss)
Black (semi-matte)
BL
Black (semi-matte)
Matte Black
MB
Matte Black
Environmental Satin Silver
ESS
Environmental Satin Silver
Bronze
BZ
Bronze
Primer
PR
Primer
Satin Anodize
SA
Satin Anodize
Inquire about custom finishes

Lens Options

Flush Lens

Flush frosted acrylic extrusion

Ordering Code: A

Drop Lens – Solid End

1” H frosted acrylic extrusion with full height aluminum end cap

Ordering Code: B

Drop Lens – Illuminated End

1” H frosted acrylic extrusion with matching acrylic end cap

Ordering Code: C

Louver

Parabolic louver with 5/8” blades at 1” spacing, formed from diffuse, high reflectance aluminum and supplied with light diffusion film. Available for 4’ and 8’ nominal length fixtures.

Ordering Code: D

Specifications

Fixture constructed of extruded aluminum, frosted extruded acrylic lenses and machined aluminum end caps

Model variations offered for wall mount and cable suspended applications

Standard finishes include architectural white (semi-matte), white (semi-gloss), black (semi-matte), matte black, environmental satin silver (alternative to anodize), bronze and primer powder coat, applied post production (consult factory for custom finishes)

Satin anodize finish also available (may require additional lead time)

Available in nominal lengths of 2’-8’ single fixtures and continuous runs

Basic continuous run fixtures provided with 18 ga. wiring harness for 6 Amp maximum load (consult factory for runs requiring multiple circuits, sensor integration, etc.)

Standard integral 120-277V driver offered with 0-10V dimming or non-dim (other dimming driver options available)

Integral 120-277V emergency battery backup available for 4’ nominal, single circuit non-dim or 0-10V (consult factory for all other lengths/drivers)

Standard outputs are 500 or 650 lumens per foot direct and 465 or 600 lumens per foot indirect

LEDs available in 2700K, 3000K, 3500K and 4000K, within a 3 step MacAdam ellipse, all with 90+ CRI typical

Life: 50,000 hours L70

Limited five year warranty

UL and C-UL listed for dry and damp locations

IBEW manufactured and assembled

Made in U.S.A.

Product Data

Nominal Fixture Length

  • 2: 22-5/8”
  • 3: 33-5/8”
  • 4: 44-5/8”
  • 5: 55-5/8”
  • 6: 66-5/8”
  • 7: 77-5/8”
  • 8: 88-5/8”

Actual dimension dependent on run configuration

Correlated Color Temperature

  • 27: 2700K - 90+ CRI
  • 30: 3000K - 90+ CRI
  • 35: 3500K - 90+ CRI
  • 40: 4000K - 90+ CRI

Driver

  • ND: non-dimming
  • D: 0-10V, 1%
  • HES: Lutron EcoSystem, soft-on/fade-to-black, 1%
  • H2: Lutron Hi-lume 2-wire forward phase, 1%, (120V ONLY)
  • E5: Lutron EcoSystem 5-Series, 5%
  • EL: eldoLED ECOdrive 0-10V, 1%

Mounting

  • WM: wall mount
  • C4: cable mount 4’ cable length
  • C8: cable mount 8’ cable length
  • CF: consult factory for custom mounting

Light Output

Direct Output and Indirect Output (lumens per foot)

  • Direct | L: low – 500 (w/ optic option B)
  • Direct | R: regular – 650 (w/ optic option B)
  • Indirect | L: low – 465 (w/ optic option 1)
  • Indirect | R: regular – 600 (w/ optic option 1)
  • CF: consult factory for custom output

Run Configuration

  • SN: single
  • ST: starter
  • AD: adder
  • TR: terminator

Lens

Direct Optic and Indirect Optic

  • Direct | A: flush lens
  • Direct | B: drop lens – solid end
  • Direct | C: drop lens – illuminated end
  • Direct | D: louver (4’ and 8’ only)
  • Indirect | 1: general lambertain distribution
  • Indirect | 2: batwing distribution

Options

  • ED: emergency driver (4’ SINGLE CIRCUIT, non-dim or 0-10V only)

Circuit

  • 1: single circuit
  • 2: two circuit (4' nominal length and longer)

Mounting Options

Cable Mount

WHEN DUAL CIRCUIT OPTION IS USED, TWO POWER CABLES ARE REQUIRED

  • Ø 1/16”x 48” (C4) or 96” (C8) aircraft cables
  • 60” (C4) or 108” (C8) power cable in coordinating finish
  • Bracket bars
  • Ø 5” white canopies
  • Ceiling couplers
  • Side exit cable grippers

Ordering Code: C4 and C8

Wall Mount
  • 1-7/8”H x 2-1/2”W aluminum bracket projects the fixture housing 3/4” from the wall surface

Ordering Code: WM

Ready To Illuminate
Your Next Project?

Find your nearest Bartco rep now