
Product Downloads
Documentation
BIM
Additional Information
BFZ100-T Specifications:
- Fixture constructed of an extruded aluminum housing and flat, frosted acrylic lens and heavy gauge, steel mounting brackets
- Fixtures project into interior space from wall or ceiling surfaces
- Up to three fixtures of any length can be joined in a run
- Fixture ends mount to accessory flush mount wall plates or the Fractalz Recessed fixture
- Flush mount wall plates mate to 4” square or octagonal junction boxes (supplied by others)
- Available in nominal 21”-51” lengths
- Optional ¾” wide accent light element available on the reverse side of the primary light source (consult factory for color options)
- Fixtures wired with 10’ low voltage leads
- Included standard remote 120-277V driver offered with 0-10V dimming or non-dim
- Standard output of the primary light source is 480 lumens per foot
- LEDs available in 2700K, 3000K, 3500K, and 4000K, within a 3 step MacAdam ellipse, all with 80+ CRI typical
- LED life rated at 50,000 hours
- Limited five year warranty
- UL and C-UL listed for dry and damp locations
- IBEW manufactured and assembled
- Made in U.S.A.
BFZ100-R Specifications:
- Fixture constructed of an extruded aluminum housing, sheet formed plaster flanges and frosted acrylic lens
- Fixture flush mounts in walls or hard ceilings and integrates with the Fractalz series Through-Space luminaires
- Available in nominal lengths of 24”-96” at 6” intervals
- Removable end plaster flanges convert single fixtures for use in continuous runs
- Fixtures provided with 18 ga. wiring harness for 6 Amp maximum load
- Standard integral 120-277V constant voltage driver offered with 0-10V dimming or non-dim
- Standard output is 480 lumens per foot
- LEDs available in 2700K, 3000K, 3500K, and 4000K, within a 3 step MacAdam ellipse, all with 80+ CRI typical
- LED life rated at 50,000 hours
- Limited five year warranty
- UL and C-UL listed for dry and damp locations
- IBEW manufactured and assembled
- Made in U.S.A.