TubularBSS511

Part of the Tubular series of LED luminaires, the BSS511 is an arm mounted model ideally suited for wall wash and stack lighting.  Slender aluminum arms project the Ø2-1/4” extruded aluminum housing from a wall or ceiling.  A frosted acrylic lens diffuses the light from high quality diodes, while a generous range of rotation allows for flexible aiming.

- > Products > BSS511

Part of the Tubular series of LED luminaires, the BSS511 is an arm mounted model ideally suited for wall wash and stack lighting.  Slender aluminum arms project the Ø2-1/4” extruded aluminum housing from a wall or ceiling.  A frosted acrylic lens diffuses the light from high quality diodes, while a generous range of rotation allows for flexible aiming.

Tags: , ,
  • Fixture housing constructed of an extruded aluminum tube, frosted acrylic extruded lens and sheet aluminum end caps
  • Fixture arms are constructed of steel pipe, Ø5/8” extruded aluminum sleeves and machined aluminum end cap couplers.
  • Includes Ø4-3/4” x 1/8” thick aluminum plates and screws for mounting to 4” octagonal wall boxes (by others)
  • Standard finishes include architectural white (semi-matte), white (semi-gloss), black (semi-matte), matte black, environmental  satin silver (alternative to anodize), bronze and primer powder coat, applied post production (consult factory for custom finishes)
  • Satin anodize finish also available (may require additional lead time)
  • Available in nominal lengths of 24”-68” single fixtures and continuous runs
  • Arms allow fixture to project from a wall or ceiling nominally 4”, 6”, 12” or 18”
  • Fixture housing rotates 332° and is locked in place with hex fastener
  • Requires a remote driver and enclosure (ordered separately, refer to supplemental driver sheet for general information and consult factory for details and specification model number)
  • Fixture wired with 10’, 18 ga., low voltage leads (measured from the end cap)
  • LEDs available in 3000K, 3500K, 4000K, 5000K, all with a typical 84-85 CRI and color consistency within a 3 step MacAdam ellipse
  • Lamp life rated at 50,000 hours
  • Limited five year warranty
  • UL and C-UL listed for dry and damp locations
  • IBEW manufactured and assembled
  • Made in U.S.A.

Product Downloads

Options
DIM | EM | CU