BodhiBSS215

The BSS215 is a linear LED luminaire for general lighting applications.  The 3-1/8” wide extruded aluminum housing is capped by a 2” tall, frosted, three sided lens that produces a wide distribution of diffuse illumination.  ¼” thick machined aluminum end caps finish off the fixture ends.

- > Products > BSS215

The BSS215 is a linear LED luminaire for general lighting applications.  The 3-1/8” wide extruded aluminum housing is capped by a 2” tall, frosted, three sided lens that produces a wide distribution of diffuse illumination.  ¼” thick machined aluminum end caps finish off the fixture ends.

Tags: , , ,
  • Fixture constructed of an extruded aluminum, extruded, frosted acrylic lens and machined aluminum end caps
  • Model variations offered for surface, wall mount and cable suspended mounting with solid or luminous end options.
  • Field adjustable cable hangers can be located at nearly any point along the fixture length
  • Standard finishes as shown below
  • Available in nominal lengths of 2’-8’ single fixtures and continuous runs
  • Basic continuous run fixtures provided with 18 ga. wiring harness for 6 Amp maximum load (consult factory for runs requiring multiple circuits, sensor integration, etc.)
  • Standard integral 120-277V driver offered with 0-10V dimming or non-dim (other dimming driver options available)
  • Integral 120-277V emergency battery backup available for 4’ nominal non-dim or 0-10V (consult factory for all other lengths/drivers)
  • Standard light outputs are 600, 840 or 1135 lumens per foot
  • LEDs available in 3000K, 3500K, 4000K, 5000K, within a 3 step MacAdam ellipse, all with 80+ CRI typical
  • Life: 50,000 hours L70
  • Passive infrared occupancy sensor available
  • Limited five year warranty

Product Downloads

BSS215 Profile