BSS205

BODHI DROP LENS BSS205

1-25/32” wide LED luminaire with drop lens

CutsheetExplore Bodhi

Downloads

Features

The BSS205 is a linear LED luminaire for general lighting applications. The 1-25/32” wide extruded aluminum housing is capped by a 1” tall, rectangular or rounded profile frosted acrylic lens that produces a wide distribution of diffuse illumination. 1/4” thick machined aluminum end caps finish off the fixture ends.

Finishes

Architectural White (semi-matte)
AW
Architectural White (semi-matte)
White (semi-gloss)
WH
White (semi-gloss)
Black (semi-matte)
BL
Black (semi-matte)
Matte Black
MB
Matte Black
Environmental Satin Silver
ESS
Environmental Satin Silver
Bronze
BZ
Bronze
Primer
PR
Primer
Satin Anodize
SA
Satin Anodize
Inquire about custom finishes

Performance

  • Nominal Length: 4'
  • Output: L: low | R: regular
  • Lumens/ft.: L: 600 | R: 800
  • Watts/ft.: L: 5.7 | R: 7.8
  • Luminaire Lumens: L: 2265 | R: 2942
  • Efficacy (LPW): L: 108 | R: 101

Note: All data reflects fixtures with 3500K LEDs and rectangular profile and solid ends

Lens Options

Rectangular Solid End

Rectangular profile with full height aluminum end cap

Ordering Code: A

Rectangular Luminous End

Rectangular profile with aluminum end cap and frosted acrylic lens end

Ordering Code: B

Rounded Solid End

Rounded profile with full height aluminum end cap

Ordering Code: C

Rounded Luminous End

Rounded profile with aluminum end cap and frosted acrylic lens end

Ordering Code: D

Specifications

Fixture constructed of an extruded aluminum housing, extruded, frosted acrylic lens and machined aluminum end caps

Model variations offered in rectangular or rounded profiles for surface and cable suspended applications with solid or luminous end options

Standard finishes include architectural white (semi-matte), white (semi-gloss), black (semi-matte), matte black, environmental  satin silver (alternative to anodize), bronze and primer powder coat, applied post production (consult factory for custom finishes)

Satin anodize finish also available (may require additional lead time)

Available in nominal 2’-8’ single fixtures and continuous runs

Basic continuous run fixtures provided with 18 ga. wiring harness for 6 Amp maximum load (consult factory for runs requiring multiple circuits, sensor integration, etc.)

Standard integral 120-277V driver offered with 0-10V dimming or non-dim (other dimming driver options available)

Integral 120-277V emergency battery backup available for 4’ nominal non-dim or 0-10V (consult factory for all other lengths/drivers)

Standard light outputs are 600 or 800 lumens per foot

LEDs available in 2700K, 3000K, 3500K, and 4000K, within a 3 step MacAdam ellipse, all with 90+ CRI typical

Life: 50,000 hours L70

Passive infrared occupancy sensor available (FOR RECTANGULAR PROFILE ONLY)

Limited five year warranty

UL and C-UL listed for dry and damp locations

IBEW manufactured and assembled

Made in U.S.A.

Product Data

Nominal Fixture Length

  • 2: 22-5/8"
  • 3: 33-5/8"
  • 4: 44-5/8"
  • 5: 55-5/8"
  • 6: 66-5/8"
  • 7: 77-5/8"
  • 8: 88-5/8"

Actual dimension dependent on run configuration and sensor option

Correlated Color Temperature

  • 27: 2700K - 90+ CRI
  • 30: 3000K - 90+ CRI
  • 35: 3500K - 90+ CRI
  • 40: 4000K - 90+ CRI

Driver

  • ND: non-dimming
  • D: 0-10V, 1%
  • HES: Lutron EcoSystem, soft-on/fade-to-black, 1%
  • H2: Lutron Hi-lume 2-wire forward phase, 1%, (120V ONLY)
  • E5: Lutron EcoSystem 5-Series, 5%
  • EL: eldoLED ECOdrive 0-10V, 1%

Mounting

  • SM: surface mount
  • WD: wall mount - direct
  • WI: wall mount - indirect
  • C4: cable mount 4' cable length
  • C8: cable mount 8' cable length
  • CF: consult factory for custom mounting

Light Output

(lumens per foot)

  • L: low - 600
  • R: regular - 800
  • CF: consult factory for custom output

Run Configuration

  • SN: single
  • ST: starter
  • AD: adder
  • TR: terminator

Lens

  • A: rectangular profile - solid end
  • B: rectangular profile - luminous end
  • C: rounded profile - solid end
  • D: rounded profile - luminous end

Options

  • S1: occ sensor pos. 1 (see options section)
  • ED: emergency driver (4' nom. non-dim or 0-10V only)

Section

Mounting Options

Surface Mount

Use appropriate fastener through Ø3/16” holes in housing

Ordering Code: SM

Wall Mount - Direct Orientation

Mounting option includes:

1-7/8” H x 2-1/2” W aluminum bracket projects the fixture housing 3/4” from the wall surface

Ordering Code: WD

Wall Mount - Indirect Orientation

Mounting option includes:

1-7/8” H x 2-1/2” W aluminum bracket projects the fixture housing 3/4:” from the wall surface

Ordering Code: WI

Cable Mount

Mounting option includes:

  • Ø 1/16”x 48” (C4) or 96” (C8) aircraft cables
  • 60” (C4) or 108” (C8) power cable (in coordinating finish)
  • Bracket bars
  • Ø 5” white canopies
  • Ceiling couplers
  • Side exit cable grippers

Ordering Code: CM

Ready To Illuminate
Your Next Project?

Find your nearest Bartco rep now